HYBRID
2.5 to 16 kW
PIONEERING PELLET HYBRID HEAT PUMP
Our pioneering Pellet:Hybrid heat pump combines the benefits of an economical heat pump with those offered by a highly efficient pellet heating system. This compact system is suitable for new build and modernisation projects alike. It offers tremendous flexibility and optimum heating convenience.
Pellet/- Hybrid Konfigurator
FINDEN SIE EINFACH UND SCHNELL IHR PASSENDES HEIZSYSTEM
Konfigurator starten
Benefits
Pellet indoor unit
Highly efficient pellet heating systems are unbeatable when outside temperatures fall below zero and higher heating circuit temperatures are called for. The low temperature technology applied scores highly in terms of its seasonal performance factor and consumption, clean combustion and dust separation, as well as maintenance costs and length of service life. The very clean rotating combustion lets the indoor pellet unit operate with CO2 neutrality, giving users heat that is 100% environmentally responsible.
Air source outdoor unit
When outside temperatures are higher and heating circuits call for lower temperatures, operation with an air source heat pump is both affordable and convenient. The Guntamatic outdoor unit operates very quietly with low inverter output and an extremely high seasonal performance factor (average COP higher than 4).
Innovative hybrid system
When it gets really cold and high heating circuit temperatures are called for, conventional heat pumps turn into veritable electric heaters. This innovative hybrid system avoids this risk by changing over automatically to pellet mode when these conditions arise. This demand-dependent changeover to the most appropriate heating method, plus excellent levels of operating and cleaning convenience make this heating solution truly pioneering.
Heating without energy ties
Energy costs, consumption and availability are issues that will continue to increase in importance in the years ahead. This hybrid system already offers persuasive solutions and makes feasible standalone values of up to 90 % and higher, even in older buildings. To achieve this, an energy supply system for a private home requires a photovoltaic system with the ability to utilise generated power on site (EV), a small battery storage unit and the utilisation of residual power by the air source heat pump, combined with a highly efficient pellet heating system for cold and sunless winter days.
smallest storage room
As a result of the combined operation, the required pellet store is relatively small (example: 1x1.5 m). Depending on preference, a high grade steel/mesh hopper or sloping floor storage room with discharge screw conveyor are available to store enough fuel for one or two years. Guntamatic storage systems are extremely reliable, require little maintenance and operate on a fail-safe basis.
PIONEERING OPERATING CONCEPT
The specifically developed hybrid management system from Guntamatic selects the most favourably priced or the most efficient operation, depending on selected preference. Highly advanced control technology enables you to regulate your interior climate, the system and storage room functions automatically. Individual adjustments can be made easily via the ergonomic touchscreen controller, a room control station (if installed) or an app on a smartphone.
Highest level
of convenience
It's all a matter of technology
sustainably futureproof
When deciding which heating system to buy, it is not the lowest purchase price that counts. On-going operating costs and possible environmental consequences should also be taken into account. Once this has been done, it becomes clear that the GUNTAMATIC hybrid system ticks all the boxes.
high grade appliance concept
On one hand highly innovative, on the other this concept is well proven, low on maintenance and convenient. Pellets are drawn automatically from a storage room and transported to the boiler. There, they are channelled (free from the risk of back burning) through a drop shaft into the gasification zone. Secondary air added to the rotating cyclone converts them into clean heat.
integral hydraulics
The hydraulic module integrated in the indoor unit supplies an on-site distributor with non-pressurised energy from the air or pellets. The fully assembled and insulated module reduces the required installation time and ensures double fail-safe operation by means of HE pumps, sensors and flow switches (may also be used without outdoor unit).
A++ heat pump technology
These quiet air source heat pumps operate with inverter technology. As part of the process, the refrigerant is initially evaporated by the environmental energy in the outdoor unit. It is then compressed using highly efficient technologies. The heat is then transferred to the heating system inside the condenser. The high level of efficiency to A++ rating is ensured by the large heat exchanger. Finally, the refrigerant is relaxed again under controlled conditions, and the refrigerant temperature reduced to the required base level.
ECOLOGICALLY HEATING WITH ECONOMY
Perfectly suited to new build, modernisation and boiler replacement
- Excellent efficiency when there is a high heat demand thanks to the pellet heating system
- Exceptional efficiency when there is low heat demand thanks to the heat pump
- Variable output control
- Temperature setback down to 25 °C without loss of efficiency
- Optimum heating mode can be selected automatically, prioritising ecology or economy
- Commissioning wizard for straightforward initial installation
- Control by means of touchscreen interface, alternatively via app and web
- High grade components for maximum operational reliability
- Sustainably futureproof thanks to an intelligent hybrid system
- Independence from fossil fuels
- Pellet heating system with patented rotating combustion chamber safeguards maximum heating efficiency and compliance with the most stringent emission regulations
- Patented rotating combustion
- Extremely low maintenance
- All components have been designed to achieve the longest possible service life and the highest stress resistance
- Exceptionally clean combustion with lambda control and optimised air supply
- Low pellet consumption on account of the use of a heat pump (therefore possible storage for several years)
- A++ heat pump technology
Specification
Tabelle zum scrollen
Specification | HYBRID 0.10 | HYBRID 0.16 |
|
---|---|---|---|
Output range | 2,5 - 10,2 | 2,5 - 16 | kW |
Energy efficiency class | A++ | A++ | |
Flow temperature | 25 - 70 | 25 - 60* | °C |
Chimney draught | 2 - 5 | 2 - 5 | Pascal |
Operating pressure | max. 3 | max. 3 | bar |
Weight, indoor unit | 325 | 325 | |
Weight, outdoor unit | 88 | 88 | kg |
Room sealed operation** | optional | optional | |
Power connection indoors | 230 VAC / 13 A | 230 VAC / 13 A | |
Power connection outdoors | 400 VAC / 16 A | 400 VAC / 16 A |
Specific data, indoor unit |
|
|
|
---|---|---|---|
Fuel | Pellets EN Plus A1 | Pellets EN Plus A1 | |
Output range, pellet unit | 3,0 - 10,2 | 3,0 - 10,2 | kW |
Flue pipe diameter (external) | 100 | 100 | mm |
Water content | 45 | 45 | Litre |
Flow | 1 | 1 | Inch |
Return | 1 | 1 | Inch |
Ash box | 15 | 15 | Litre |
Hopper capacity | 40 | 40 | Litre |
Recharge interval, hopper | 1 - 9 | 1 - 9 | Min. |
Suction line length (max.) | 25 | 25 | Metre |
Specific data, outdoor unit |
|
|
|
---|---|---|---|
Output range | 2,5 - 9.0 | 3,5 - 16 | kW |
COP A7/W35 | 4.4 | 4.4 | COP |
Sound pressure level (at 5 m) | 43 | 43 | dB |
Refrigerant (pre-charged for a line up to 15 m long; 2 kg) | R410A | R410A | |
Refrigerant line | 1/4"; 5/8" insulated | 1/4"; 5/8" insulated | Inch |
<br/> * At maximum output, the air source heat pump operates as a preheating stage for the pellet unit (observe max. flow temperature).<br/> ** Unsuitable for installation inside the living space (no DiBT permit)
Test report
Summary of test assessments:
"possible standalone values up to approximately 90 % in conjunction with an EV and a PV system; optimum efficiency, as both system only operate in their most favourable phase; highly frugal or efficient through operation selection according to best economy or efficiency; requires refrigerant; ..."
- Tested in 2009 for cleanest combustion and particularly high efficiency to EN 303-5 by the BLT Wieselburg
- Tested for mechanical robustness (under pressure) by the TÜV SÜD SZA
- Tested for fire safety by the IBS Linz
- Tested in accordance with the strict requirements of the European Machine and Plant Safety (CE)
- Tested for electrical safety by Ziviltechnik Stöp
- Assessment of risk analysis and CE certification by HET engineers
Awarded the French Innovation Prize 2009
Awarded the Austrian Innovation Prize 2010
Awarded the Energie Genie [Energy Genius] 2016
Awarded the Austrian Environmental seal ZU 37